Search found 99 matches

by cleanrf
Sat Feb 25, 2023 2:35 am
Forum: Network Connections & Network Hardware
Topic: Bootloader sees 200D but Thetis does not. Direct connected
Replies: 2
Views: 2315

Bootloader sees 200D but Thetis does not. Direct connected

I have a 200D running protocol 2 that I keep getting the "are you sure the sdr is powered error" The bootloader sees the Anan. I am direct connected with a 3' ethernet cable. I bought the 200D from a friend who had it set up for Static IP. I changed it back to DHCP using 0.0.0.0 in bootloa...
by cleanrf
Sat Jul 16, 2022 6:56 pm
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

Swapping different computers from the 100B, 10E etc the 100B and the issue is still happening. Via the suggestion of a friend to try all antenna ports and then the bypass. I get normal receive when antenna is connected to bypass. It was suggested that there is an IC that will cause this if it is bad...
by cleanrf
Fri Jul 15, 2022 6:09 pm
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

I have downgraded to 1.3 and running the current version of Thetis I am still having the same issue. Damn. :( Now starting to grasp at straws. I noticed in your photos above that each radio was using different client software. What happens if you swap that situation around? Put the 10E on the 100B ...
by cleanrf
Fri Jul 15, 2022 3:11 am
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

@cleanrf -- yep, you missed the clearly delineated step in the instructions where it said to install Winpcap or Npcap ;) @Ernie -- good point! That's an easy test before going through a firmware reload process. No, I installed Npcap but it did not work, maybe something I did wrong. It worked after ...
by cleanrf
Thu Jul 14, 2022 7:38 pm
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

You have to install WinPcap or Npcap to solve the missing DLL problem: https://apache-labs.com/community/viewtopic.php?f=18&t=2333 WinPcap: https://www.winpcap.org/ Npcap: https://npcap.com/ I believe I installed NpCap then rebooted. I will double check when I get that computer later. Thanks
by cleanrf
Thu Jul 14, 2022 2:51 am
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

Scott, can you point me to a thread that explains how to do this? I tried following the instructions in this thread https://apache-labs.com/community/viewtopic.php?f=18&t=2333 and it when I attempt to start HPSDR Bootloader I get this error. Thanks
by cleanrf
Wed Jul 13, 2022 4:25 am
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

In the pictures below the 10e on a laptop and the 100b on a desktop are next to each other to perform the test. Signal from the sig gen is set at -73 dBm at 9.000 mHz and connects to each radio and the calibration was run. Below I’d the difference. The 10e shows -73 dBm with the noise floor around -...
by cleanrf
Tue Jul 12, 2022 11:30 pm
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

Here ya go.
by cleanrf
Tue Jul 12, 2022 10:30 pm
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

I did not check to see if signal strengths were similar when compared to my 10E but I did notice they were noticeably weaker compared to the noise floor on 100B.
by cleanrf
Tue Jul 12, 2022 5:50 pm
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

I have an accurate HP signal generator. The first time I fired the radio software up the signals were weak when compared to using thetis on another laptop and my 10-E. Same antenna and coax. I tried calibrating using my signal generator which only slightly changed the S meter and panadapter. The sig...
by cleanrf
Tue Jul 12, 2022 4:56 am
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

I tried using my HP sig generator to calibrate the receive level, I tried using the WWV and still have the same issue. I did notice when using the Freq Cal in the calibration tab that when I clicked start the WWV signal was noticeably stronger and almost quieted the static. I attempted to download a...
by cleanrf
Mon Jul 11, 2022 6:38 pm
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

On the newer version of Thetis on 100b I don’t see a S-ATT only an ATT which is set at zero and signals are noticeably weaker on the 100b using the same antenna.
by cleanrf
Mon Jul 11, 2022 4:51 am
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

Re: New to me 100B signals lower than other radios.

I looked through some notes and realized that on my Anan 10-E the S-ATT was the culprit of the issue with that rig. Not sure if it matters but on the 100B it is using firmware version 1.5. My 10-E is using version 1.3.
by cleanrf
Mon Jul 11, 2022 4:12 am
Forum: Thetis
Topic: New to me 100B signals lower than other radios.
Replies: 30
Views: 5354

New to me 100B signals lower than other radios.

I have recently acquired a 100B to use on my bench. I am running the current version of Thetis. When listening to other stations on this rig compared to my ic-7300 the stations signals seem to be weak, like slightly above the noise floor and hard to make out. Adjusting the AGC gain on the main scree...
by cleanrf
Sat Jan 08, 2022 11:29 pm
Forum: Thetis
Topic: Anan 10-E random unkeying?
Replies: 3
Views: 1481

Re: Anan 10-E random unkeying?

Does the same thing with amplifier out of line.
by cleanrf
Sat Jan 08, 2022 1:05 am
Forum: Thetis
Topic: Anan 10-E random unkeying?
Replies: 3
Views: 1481

Re: Anan 10-E random unkeying?

I also notice this doesn't seem to happen as often if I have the Drive on the anan backed down to around 25% or so.
by cleanrf
Thu Jan 06, 2022 2:13 am
Forum: Thetis
Topic: Anan 10-E random unkeying?
Replies: 3
Views: 1481

Anan 10-E random unkeying?

Running Thetis accessed from 3 different computers, no shared databases amongst them same issue with any of the computers. I use the radio into a homebrew LDMOS amplifier and have been for years, in the last few months people will tell me I unkeyed mid transmission and the radio still appears to be ...
by cleanrf
Mon May 17, 2021 10:02 pm
Forum: Thetis
Topic: thetis PTT spacebar with other window open.
Replies: 2
Views: 1870

Re: thetis PTT spacebar with other window open.

Thank you Scott.
by cleanrf
Mon May 17, 2021 3:59 am
Forum: Thetis
Topic: thetis PTT spacebar with other window open.
Replies: 2
Views: 1870

thetis PTT spacebar with other window open.

Does anyone know of a way to PTT thetis with it open in the background? Say I am rag chewing and looking at mousers website etc? It only works now when you place the mouse cursor on the thetis app.

Thanks
by cleanrf
Mon Jan 25, 2021 10:16 pm
Forum: Thetis
Topic: Warbled receive audio.
Replies: 18
Views: 8308

Re: Warbled receive audio.

Thanks guys. I am operating remotely out of town for next few days. I will test when I get back. I am pretty sure I disabled the resampler. I will check on changing protocol when I get home.
by cleanrf
Mon Jan 25, 2021 2:38 am
Forum: Thetis
Topic: Warbled receive audio.
Replies: 18
Views: 8308

Re: Thetis 2.8.11 Released!

Joe N9VX was having a similar issue with echo and distortion. This is what I posted here. The warbled audio was a receive only issue. He is my last post on that warbled audio. "I seemed to have solved the receive audio issue but for the last few days I have been getting complaints that my trans...
by cleanrf
Sun Jan 24, 2021 3:03 am
Forum: Thetis
Topic: Thetis 2.8.11 Released!
Replies: 232
Views: 231936

Re: Thetis 2.8.11 Released!

I started a thread a few months ago about my 10-E occasionally splattering badly and people report it has an echo sound. This is SSB and AM mode. Running windows 10 pro. I believe this has only happened with pure signal on. I read through this thread but not sure I saw an actual solution. Also, has ...
by cleanrf
Thu Dec 31, 2020 7:22 pm
Forum: Remote Operation Over The Internet
Topic: RDP whit REMAUD...no VAC-Cable
Replies: 2
Views: 11455

Re: RDP whit REMAUD...no VAC-Cable

I too would like to experiment with REMAUD. I use RDP and Voicemeter Banana with cheap headset and it works most of the time. I do have issues where my transmit audio gets choppy sometimes. It seems like it is worse when I first start transmitting remotely and after a few key ups it seems to get bet...
by cleanrf
Mon Nov 16, 2020 5:54 am
Forum: Thetis
Topic: Warbled receive audio.
Replies: 18
Views: 8308

Re: Warbled receive audio.

I seemed to have solved the receive audio issue but for the last few days I have been getting complaints that my transmit audio starts to echo or get very unrecognizable and it starts splattering badly. Its like it is breaking into oscillation. Sometimes unkeying and rekeying is enough to fix it for...
by cleanrf
Wed Nov 11, 2020 10:34 pm
Forum: Thetis
Topic: Warbled receive audio.
Replies: 18
Views: 8308

Re: Warbled receive audio.

Have you tried setting the ""Force" checkboxes? With ASIO I recommend setting both PortAudio buffers to 0ms. Why not run in manual for both RingBuffer settings? I will check the force boxes tonight. Good to know on the port audio. I am not sure why the Ring Buffer settings are like t...
by cleanrf
Wed Nov 11, 2020 8:13 pm
Forum: Thetis
Topic: Warbled receive audio.
Replies: 18
Views: 8308

Re: Warbled receive audio.

It reads firmware version Ver: 0.0
by cleanrf
Wed Nov 11, 2020 2:57 am
Forum: Thetis
Topic: Warbled receive audio.
Replies: 18
Views: 8308

Re: Warbled receive audio.

rbduck wrote:Do you have Noise Reduction on? NR?

No.
by cleanrf
Wed Nov 11, 2020 2:55 am
Forum: Thetis
Topic: Warbled receive audio.
Replies: 18
Views: 8308

Re: Warbled receive audio.

Warbled receive audio occasionally. I recently installed Thetis and now I occasionally have the receive audio issue where it sounds like the person transmitting is under water but it comes and goes. Transmit is fine. This is using a laptop plugged into the router and the Anan 10-e also plugged into...
by cleanrf
Wed Nov 11, 2020 2:54 am
Forum: Thetis
Topic: Warbled receive audio.
Replies: 18
Views: 8308

Re: Warbled receive audio.

Are you using VAC or are you plugging headphones/speakers into the 10e? Are you running P1 or P2 firmware? Hello Scott. I am using VAC with a Behringer umc202mc interface. It never did this before upgrading to Thetis. I am not sure which firmware I am using. Any help determining this and if need be...
by cleanrf
Tue Nov 10, 2020 4:08 am
Forum: Thetis
Topic: Warbled receive audio.
Replies: 18
Views: 8308

Warbled receive audio.

Warbled receive audio occasionally. I recently installed Thetis and now I occasionally have the receive audio issue where it sounds like the person transmitting is under water but it comes and goes. Transmit is fine. This is using a laptop plugged into the router and the Anan 10-e also plugged into ...

Go to advanced search