Search found 62 matches

by cleanrf
Sun Mar 24, 2019 9:23 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Remote Antenna Switch
Replies: 4
Views: 1107

Re: Remote Antenna Switch

I am using a homebrew coax switch that is controlled by an ip controlled relay board. I will try to get some pics uploaded and more details.
by cleanrf
Sun Mar 24, 2019 4:13 am
Forum: PowerSDR mRX
Topic: Record playback feature
Replies: 8
Views: 1265

Re: Record playback feature

Install with clean database due to other issues, still have the same issue. Any suggestions?
by cleanrf
Sat Mar 09, 2019 8:47 pm
Forum: PowerSDR mRX
Topic: Record playback feature
Replies: 8
Views: 1265

Re: Record playback feature

The playback, I can record myself to use for setting up CFC but I cannot hear myself or see it on playback why MOX is enabled, I can hear and see it if I play it back without keying up the radio, no MOX.
by cleanrf
Sun Feb 24, 2019 4:12 am
Forum: PowerSDR mRX
Topic: Record playback feature
Replies: 8
Views: 1265

Re: Record playback feature

I still have not figured out what is causing this or a fix. Any suggestions?
by cleanrf
Sun Dec 30, 2018 11:24 pm
Forum: PowerSDR mRX
Topic: No TX audio in AM mode.
Replies: 3
Views: 645

Re: No TX audio in AM mode.

You are not providing nearly enough information to debug your problem. Did AM mode ever work for you? Or is this the first time you've tried it? Does the radio go into transmit mode? Do you at least get a carrier? If so, what power level are you set to, and what is the power level of the carrier? W...
by cleanrf
Sun Dec 23, 2018 5:35 pm
Forum: PowerSDR mRX
Topic: No TX audio in AM mode.
Replies: 3
Views: 645

No TX audio in AM mode.

I have TX audio in SSB mode but no TX audio in AM mode. Using a behringer UMC202HD microphone interface.
Thanks for any help.
by cleanrf
Sun Dec 16, 2018 5:41 pm
Forum: PowerSDR mRX
Topic: Record playback feature
Replies: 8
Views: 1265

Record playback feature

The record/ playback feature does not work for me when using VAC. It works normally if I am using the microphone jack on the front of the anan 10E. Any suggestions?

Thanks
by cleanrf
Mon Aug 27, 2018 6:05 pm
Forum: PureSignal Operations
Topic: Anan 10e, k19 mod yes or no?
Replies: 10
Views: 2164

Re: Anan 10e, k19 mod yes or no?

Thanks for the reply Scott. I carefully removed K19 from the board and reinstalled with the legs originally grounded now pointing up and routed to a small piece of coax that led to a SMA female on the back of the radio. I drilled a hole in the back panel. After reassembling the radio it would not po...
by cleanrf
Sat Aug 25, 2018 5:10 am
Forum: PureSignal Operations
Topic: Anan 10e, k19 mod yes or no?
Replies: 10
Views: 2164

Re: Anan 10e, k19 mod yes or no?

So is the xtronics sampler useless for the anan 10 and 10E?
What about this https://www.tapr.org/kits_trplus.html ? You guys that seem to know all the bells and whistles about these rigs post up your thoughts.
Thanks
by cleanrf
Wed Aug 22, 2018 5:15 am
Forum: PureSignal Operations
Topic: Anan 10e, k19 mod yes or no?
Replies: 10
Views: 2164

Re: Anan 10e, k19 mod yes or no?

This is the conflicting information I was referring to. I would like to find a way to use the xtronics directional coupler. How is k19 different than the way this scenario is accomplished on the ANAN rigs that run puresignal with external amplifier? Like the later ANAN 100, 100D, and 200D? I also se...
by cleanrf
Tue Aug 21, 2018 1:55 am
Forum: PureSignal Operations
Topic: Anan 10e, k19 mod yes or no?
Replies: 10
Views: 2164

Re: Anan 10e, k19 mod yes or no?

I tend to agree regarding the cross talk. I just seem to remember Stu advising against the K19 to SMA mod. I am going to give it a shot.
by cleanrf
Mon Aug 20, 2018 9:18 pm
Forum: PureSignal Operations
Topic: Anan 10e, k19 mod yes or no?
Replies: 10
Views: 2164

Anan 10e, k19 mod yes or no?

I am getting conflicting advice regarding modifying the anan 10e to use an external amp with puresignal. I have read modify k19 by removing the ground and route to sma on back of the radio and then I read that this will allow to much cross talk. What is the correct way to go about this? I am using t...
by cleanrf
Thu Aug 16, 2018 10:55 pm
Forum: PureSignal Operations
Topic: Pure signal not working modified anan 10-E
Replies: 0
Views: 1776

Pure signal not working modified anan 10-E

My setup is an ANAN 10E with PowerSDR mRX PS v3.4.6. I have removed the small jumper between J3 and J29. I have a homebrew T/R relay box "pictured below" configured like the top of Ricks page. http://www.qsl.net/wa6nut/PureSignal My amplifier is a homebrewed pair of BLF188XR that produces ...
by cleanrf
Mon Dec 11, 2017 9:11 pm
Forum: PureSignal Operations
Topic: ANAN 10-E Pure signal port.
Replies: 4
Views: 2275

Re: ANAN 10-E Pure signal port.

When you sat SMA on the rear panel, are you suggesting adding an additional SMA connector? When you say J5 are you referring the the accessory port or something else? [EDIT] I found J5. I found where it looks like Bill W7AAZ figured out a way to make pure signal work. I will reread what he has done ...
by cleanrf
Sun Dec 10, 2017 11:09 pm
Forum: PureSignal Operations
Topic: ANAN 10-E Pure signal port.
Replies: 4
Views: 2275

Re: ANAN 10-E Pure signal port.

I will go have a look.
Thanks for the advice.
by cleanrf
Sun Dec 10, 2017 9:23 pm
Forum: PureSignal Operations
Topic: ANAN 10-E Pure signal port.
Replies: 4
Views: 2275

ANAN 10-E Pure signal port.

I do not have a bypass or Ext1 port on the reap panel of the anan 10-e. Maybe I missed something in the manual but I did not see this info. I have the XDC-4SO coupler and 20db attenuator and sma cable. Amplifier is usually used at about 1200 -1450 pep.

Thanks for any help.
by cleanrf
Sun Dec 03, 2017 11:48 pm
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

I have been thinking of giving this a try. My current scenario is perfect 95% of the time.
by cleanrf
Sun Dec 03, 2017 9:44 pm
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

Just wanted to post an update. I have been controlling my station and using openhpsdr remotely for a few months now. Its works rather well. The only issue I have is with my record (transmit) audio being choppy and breaking up sometimes. I can see this happen as it happens on the screen of psdr. I ha...
by cleanrf
Sat Oct 28, 2017 5:00 am
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

Thank you for all your help Scott!!
by cleanrf
Fri Oct 27, 2017 3:51 am
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

I still cannot figure out what causes the hardware out on VM banana to change to 44100 hz when in RDP, I have just opted to change the sample rate to 44100 hz in the VAC 1 tab when operating remote with no issues that I can see. I have a trusted source and used it this way for a few hours a night fo...
by cleanrf
Tue Oct 17, 2017 3:54 am
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

w-u-2-o wrote:Do you have a different remote machine you can try?


Unfortunately no.
by cleanrf
Mon Oct 16, 2017 3:09 pm
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

Hello all. I wanted to update where I am at here. I tried to uninstall and reinstall everything in an attempt to solve the 44100 hz issue when choosing MME: hardware out in voicemeeter banana. Still had the same issue. I am not sure if it is due to my on board sound card on HP computer or not. I cha...
by cleanrf
Sat Oct 07, 2017 2:33 pm
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

I will give that a try this evening. I was actually able to test it last night while out of town at a ham fest. Hotel internet was so so, 15-18 mb down, 2-5 up with 30ms ping. There is a few second delay or more between when I see the radio key up and when I see my audio register. I am still getting...
by cleanrf
Fri Oct 06, 2017 2:38 pm
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

All attempts to change sample rate in psdr to 48000 hz results in either a pop up (portaudio error: -9997 Invalid sample rate) (portaudio error: 9988 invalid steam pointer) or I can choose a different hardware out in VM and not be able to hear any playback audio through headphone or speakers but do ...
by cleanrf
Thu Oct 05, 2017 10:05 pm
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

Will do, thanks. Do you have a suggestion of how to use the MON button or REC so I can tinker with my audio settings? I know there will be latency but I cannot make it work without either an echo and squeal while using MON and I cannot get it to record. This is only when VAC is enabled in psdr. Thanks
by cleanrf
Thu Oct 05, 2017 3:34 pm
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

I do not have VM on the remote machine. The screen shots are of VM on the server machine before I set it to remote audio and then after I set it to remote audio. The reason I changed the sample rate in psdr was because it was the only thing I could do to not get the pop up warning of wrong sample ra...
by cleanrf
Wed Oct 04, 2017 4:11 pm
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

There may be a better place for this question. When using VAC in PSDR do you have a suggestion on how to monitor transmit audio using the MON botton or how to get the REC button to save a file? This is not an issue when not using VAC but there is either a horrible echo while monitoring or I cannot h...
by cleanrf
Wed Oct 04, 2017 4:06 pm
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

Server side settings
by cleanrf
Wed Oct 04, 2017 2:37 pm
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

I will double check when I get home. You scenario with 44100 hz sample rate sounds exactly like the issue I am having. These are screenshots of the current server side and remote side VM settings and the VAC1 settings in PSDR. I will look through the windows sound settings again and also through vir...
by cleanrf
Wed Oct 04, 2017 5:28 am
Forum: Remote Operation Over The Internet
Topic: Anan 10-E remote operation.
Replies: 80
Views: 24012

Re: Anan 10-E remote operation.

Update. I finally got everything working. It seems one of the issues I was having was with a sample rate setting. I had to change a sample rate setting in psdr to 44100 hz. It seems no matter what I did I kept getting a pop up warning of wrong sample rate. The hardware out of VM banana is 44100 hz a...

Go to advanced search