Search found 7 matches

by pa0fot
Wed Jan 16, 2019 5:04 pm
Forum: Upgrading/Downgrading
Topic: Where to find .pof file for programming with USB Blaster?
Replies: 30
Views: 32630

Re: Where to find .pof file for programming with USB Blaster?

Quoting my self from my post above..."check the other threads". As in check the other threads in this forum. More specifically: https://apache-labs.com/community/viewtopic.php?f=32&t=2993 Discussion on the performance of the 7000/8000 firmware has kind of settled into that one thread....
by pa0fot
Wed Jan 16, 2019 4:58 pm
Forum: Upgrading/Downgrading
Topic: Where to find .pof file for programming with USB Blaster?
Replies: 30
Views: 32630

Re: Where to find .pof file for programming with USB Blaster?

BTW, you are the second person who had this problem and had to switch to another PC. My suspicion is that either a) both machines have multiple NICs (that includes WiFi) and you did not set your network metric manually as specified in the instructions or b) WinPCAP needed to be installed/reinstalle...
by pa0fot
Wed Jan 16, 2019 4:29 pm
Forum: Upgrading/Downgrading
Topic: Where to find .pof file for programming with USB Blaster?
Replies: 30
Views: 32630

Re: Where to find .pof file for programming with USB Blaster?

Scott - I can't find P2 Firmware v1.6 on Github.
Any hint where to find it?
73, Folkert
by pa0fot
Wed Jan 16, 2019 1:42 pm
Forum: Upgrading/Downgrading
Topic: Where to find .pof file for programming with USB Blaster?
Replies: 30
Views: 32630

Re: Where to find .pof file for programming with USB Blaster?

Got a very quick response from Joachim / Abhi: The bootloader is OK and does NOT need to be reinstalled since the FPGA heartbeat LED is blinking in bootloader model, Please ensure that: The Radio is connected directly to the PC He has not defined a fixed IP All physical connections etc are OK Try ag...
by pa0fot
Tue Jan 15, 2019 9:34 pm
Forum: Upgrading/Downgrading
Topic: Where to find .pof file for programming with USB Blaster?
Replies: 30
Views: 32630

Re: Where to find .pof file for programming with USB Blaster?

Thanks for the advice.
I contacted Apache Labs Germany http://www.apache-labs.de/.
Joachim is always very helpful and responsive.
Vy 73,
Folkert
by pa0fot
Tue Jan 15, 2019 8:20 am
Forum: Upgrading/Downgrading
Topic: Where to find .pof file for programming with USB Blaster?
Replies: 30
Views: 32630

Re: Where to find .pof file for programming with USB Blaster?

Dear Scott, Thanks very much for fast response!! Yes, changed the Bootloader switch while powered off. Then, after switching on, observed behavior is as follows: Bootloader switch OFF (i.e. shifted to the right as seen from front of unit, jumper is OPEN): As seen from the front: FPGA Heartbeat LED o...
by pa0fot
Mon Jan 14, 2019 11:30 pm
Forum: Upgrading/Downgrading
Topic: Where to find .pof file for programming with USB Blaster?
Replies: 30
Views: 32630

Where to find .pof file for programming with USB Blaster?

After a failed update to P2 firmware v1.5 the 7000 / Orion Mk II is not recognized anymore by either v2 web programmer or the bootloader. The P2 web programmer showed "Erasing" for more then 10 minutes, and failed to start programming. This may have been caused because I forgot to rename t...

Go to advanced search