Spoke with the Log4OM support, they added the checkbox you were mentioning in the latest log4om version (today!). I clicked it, now everything works well.
thank you for your support!
73
Joe IZ4JUK
Search found 10 matches
- Tue Mar 03, 2020 9:08 pm
- Forum: Thetis
- Topic: + or - 600 hz clicking on a spot
- Replies: 13
- Views: 8960
- Sun Mar 01, 2020 8:25 pm
- Forum: Thetis
- Topic: + or - 600 hz clicking on a spot
- Replies: 13
- Views: 8960
Re: + or - 600 hz clicking on a spot
I'll try this way, thanks
73
Joe
73
Joe
- Sun Mar 01, 2020 7:58 pm
- Forum: Thetis
- Topic: + or - 600 hz clicking on a spot
- Replies: 13
- Views: 8960
Re: + or - 600 hz clicking on a spot
Hi Mike, I thank you for your support. But I really can't find this setting in the CAT setup of LOG4OM. Here the screenshot of the CAT settings: https://i.postimg.cc/0jNQxFYg/cat.jpg I use OmniRig for the cat with log4om... Can yu drive me in finding this setting please? thanks again 73 Joe
- Sun Mar 01, 2020 4:10 pm
- Forum: Thetis
- Topic: + or - 600 hz clicking on a spot
- Replies: 13
- Views: 8960
Re: + or - 600 hz clicking on a spot
Hi Mike,
yes, that's right!
The minimum picth settable value is 200 (not 0).
Setting the pitch to 200 (in SETUP/DSP/CW), now the shift is 200 hz.
what should I do to avoid it?
Thanks
73
Joe
yes, that's right!
The minimum picth settable value is 200 (not 0).
Setting the pitch to 200 (in SETUP/DSP/CW), now the shift is 200 hz.
what should I do to avoid it?
Thanks
73
Joe
- Fri Feb 28, 2020 9:16 am
- Forum: Thetis
- Topic: + or - 600 hz clicking on a spot
- Replies: 13
- Views: 8960
Re: + or - 600 hz clicking on a spot
Hi Mike,
unfortunately not.
With Log4Om:
when the VFO is in CW and I click on a spot on SSB, the VFO goes on the spot frequency with a shift of +600 Hz
when the VFO is in SSB and I click on a spot on CW, the VFO goes on the spot frequency with a shift of -600 hz
73
Joe
iz4juk
unfortunately not.
With Log4Om:
when the VFO is in CW and I click on a spot on SSB, the VFO goes on the spot frequency with a shift of +600 Hz
when the VFO is in SSB and I click on a spot on CW, the VFO goes on the spot frequency with a shift of -600 hz
73
Joe
iz4juk
- Thu Feb 27, 2020 9:28 pm
- Forum: Thetis
- Topic: + or - 600 hz clicking on a spot
- Replies: 13
- Views: 8960
Re: + or + 600 hz clicking on a spot
Hi Mike
No, the station is not there.
Clicking one more time on the spot, the vfo goes exactly on the spot frequency (not + or - 600 hz differently from the spot frequency) and now I listen the station.
Or am I wrong in something?
I used this system for ages and never had this problem...
No, the station is not there.
Clicking one more time on the spot, the vfo goes exactly on the spot frequency (not + or - 600 hz differently from the spot frequency) and now I listen the station.
Or am I wrong in something?
I used this system for ages and never had this problem...
- Thu Feb 27, 2020 8:51 pm
- Forum: Thetis
- Topic: + or - 600 hz clicking on a spot
- Replies: 13
- Views: 8960
Re: + or + 600 hz clicking on a spot
Yes right...
it changes the mode, but the frequency shows a shift...
i just resetted the database, and it still does it
it changes the mode, but the frequency shows a shift...
i just resetted the database, and it still does it
- Thu Feb 27, 2020 8:40 pm
- Forum: Thetis
- Topic: + or - 600 hz clicking on a spot
- Replies: 13
- Views: 8960
+ or - 600 hz clicking on a spot
Hi all, I'm using the thetis v2.6.9 with my Anan 100D (Angelia v11,7, the only one working), and I'm facing a problem with both my logging programs (Log4Om for the everyday use and QarTest for contests) With Log4Om when I click on a spot ON THE SAME MODE of the VFO, it moves correctly. When I click ...
- Tue May 23, 2017 11:52 am
- Forum: Hermes 14-bit Firmware (10E, 100B)
- Topic: Anan 10E RX attenuation and tx delay
- Replies: 3
- Views: 11817
Re: Anan 10E RX attenuation and tx delay
Hi Scott Thanks for your reply. All the attenuator values are set at zero. My mic is plugged directly into di anan. As a pc i'm using a very powerfull desktop with i7 processor 4950k, ram dominator 2400 mhz, ssd and Graphic card able to manager a 4k monitor. The problem is that i can't hear any late...
- Tue May 23, 2017 7:06 am
- Forum: Hermes 14-bit Firmware (10E, 100B)
- Topic: Anan 10E RX attenuation and tx delay
- Replies: 3
- Views: 11817
Anan 10E RX attenuation and tx delay
Hi All, after owning the Anan 10E (14 bit) since almost a couple of years, I'm still facing a couple of issues which I'd like to explain you, maybe I'm not the only one. Attenuation on high bands: on 15, 12, 10 and 6 mt my RX seems to be quite deaf. I'm sure there is a strong attenuation. Comparing ...