Search found 76 matches

by Prem
Tue Feb 06, 2018 9:20 am
Forum: piHPSDR
Topic: Homebrewed PiHpsdr
Replies: 10
Views: 12746

Re: Homebrewed PiHpsdr

Hi Team, After spending some time with my PiHPSDR, I came to notice that once I store a freq and later if I recall this freq stored from MEM menu, this PSDR vanishing error happens. Is anyone else noticed this or else an issue locally in my unit ?. Please share your thoughts. Also can you help me to...
by Prem
Tue Feb 06, 2018 7:11 am
Forum: piHPSDR
Topic: Homebrewed PiHpsdr
Replies: 10
Views: 12746

Homebrewed PiHpsdr

Hi Team, I have homebrewed my RPi controller for me HB Hermes. I notice that the HPSDR shutdown after few minutes of running. Even the HPSDR screen disappear ! What could be wrong ? I run web browser and watch YouTube video without any issue. I power my Pi from a 5V , 2A rated power adaptor. I use m...
by Prem
Sun Jan 14, 2018 5:04 pm
Forum: PowerSDR mRX
Topic: CW Mode Operation
Replies: 34
Views: 28248

Re: CW Mode Operation

Hi Gary, After increasing delay to 360 ms, I could get rid of that issue. One more thing to get clarified . I use VAC and listen to radio RX as well as MON signal thru VAC and so PC audio. But in CW mode , I think we get CW TX side tone only thru head phone jack on radio ? What is function of “Semi ...
by Prem
Thu Dec 14, 2017 5:16 am
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Thanks Ervin and Scott for guidance given.
My Touch OSC Layout in my iPad is working ok now.

73s

Prem
by Prem
Sun Dec 10, 2017 1:27 pm
Forum: PowerSDR mRX
Topic: CW MODE ERROR
Replies: 0
Views: 2326

CW MODE ERROR

Hi Team,

I notice that in my Hermes PSDR, when I select CWL or CWU mode, immediately radio move to TX mode!
Is this a hardware fault or any software bug ?

I have disabled MIC as well as VAC. Still same issue.

Can someone advise me on this issue ?

73s

Prem
by Prem
Sun Dec 10, 2017 7:55 am
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi,

My doubt is that, if the RX1 Vol is same as VFO A Vol ??

73s

Prem
by Prem
Thu Dec 07, 2017 5:39 am
Forum: Protocol 2 Firmware (all radios)
Topic: Hermes Protocol 2 firmware v10.3 released
Replies: 47
Views: 68633

Re: Hermes Protocol 2 firmware v10.3 released

Hi Scott, Where we need to limit FPGA Temp ? Now my FPGA with Pro-1 running , max temp on heat sink is 39 Deg C, with my room temperature at around 9 deg less always. I have a heat sink fixed to FPGA and then I have a small fan on box top which blow air to FPGA heat sink. Can I directly load Pro-2 f...
by Prem
Wed Dec 06, 2017 6:10 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Erwin,

Thanks for response.
I have noticed VFO A & B Vol. Is it same as RX1 & RX2 Vol or AF ?? If same, why we have two different functions ?? That was confusing me.
Even in PSDR screen, we have

AF
RX1 AF
RX2 AF

Then separate vertical Sliders named as " Vol"

73s

Prem
by Prem
Wed Dec 06, 2017 2:57 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Hermes Protocol 2 firmware v10.3 released
Replies: 47
Views: 68633

Re: Hermes Protocol 2 firmware v10.3 released

Hi Scott,

Do we need to do any modification than changing fuse , to load Protocol 2 software to Hermes ? I feed 13.8V to my Hermes and 5V and 12V are onboard generated.

Rds,,
Prem
by Prem
Tue Dec 05, 2017 4:20 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott,

I could see

Vol VFO A &B
AF Gain which is Master AF in PSDR screen
RX2 Vol.

RX1 AF or Vol not seen
Also CTUNE not seen.

Can you tell me the Text seen in Mapping list for these missing functions (in my case) ?

73s

Prem
by Prem
Tue Dec 05, 2017 2:08 pm
Forum: Protocol 2 Firmware (all radios)
Topic: Hermes Protocol 2 firmware v10.3 released
Replies: 47
Views: 68633

Re: Hermes Protocol 2 firmware v10.3 released

Hi Team,

I wish to have a try on Protocol 2 firmware on my HB Hermes. Any risk ? Any special care needed ?
What are the main advantages with this PC -2 ??

73s

Prem
by Prem
Tue Dec 05, 2017 2:01 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott,

Thanks for compliment.
We miss the Freq read out when away from PC screen ! We should be able to see the freq ! Rest all OK .

Also I noticed we don't have option to MAP few things as :

1. RX1 AF
2. CTUNE

etc.

73s
Prem
by Prem
Tue Dec 05, 2017 9:15 am
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott,

So we cant do the frequency displayed in OSC screen.
Please find attached the layout details I prepared modifying your layout and referring to some other sample layouts.
I have 3 Pages in my Layout as attached. If anyone interested, I can share the OSC design data file.

73s

Prem
by Prem
Mon Dec 04, 2017 12:41 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott,

I designed my OSC layout which cover most of functions on PSDR screen.
I like to add option to display VFO Freq display in OSC layout. Is that function available ??

73s,
Prem
by Prem
Mon Dec 04, 2017 6:57 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: 200D RX2 ADC Overload
Replies: 7
Views: 8148

Re: 200D RX2 ADC Overload

Hi Scott,

I could not get it understood !!
Is it the strong signals that cause this ??

73s

Prem
by Prem
Sun Dec 03, 2017 10:26 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: 200D RX2 ADC Overload
Replies: 7
Views: 8148

Re: 200D RX2 ADC Overload

Hi Team,

I get ADC Overload Flag when I run CuSDR with my Hermes.
Also once in a while with PSDR mRx 3.4 (latest Ver).
What is the reason for this ADC over load ? What we have to do to clear this ?

73s,
Prem
by Prem
Wed Nov 29, 2017 12:28 pm
Forum: PowerSDR mRX
Topic: PowerSDR mRX PS 3.4.6 Released
Replies: 33
Views: 26355

Re: PowerSDR mRX PS 3.4.6 Released

Hi Kelvin,

In my set up with Hermes, I notice my AGC gain jump to 93 when I open set up screen and cancel it to close ! Hope our Master Scott will also have a look into this.

73s

Prem
by Prem
Tue Nov 28, 2017 5:30 am
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott, It was a mistake from my side to get the samples from a different folder ! I was checking some where ! :) How is the impact of "Custom sized Layout" as seen in your layout ? I was trying to make a new layout modifying your layout. Notice some controls behave as if I pressed some ...
by Prem
Mon Nov 27, 2017 5:35 am
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott,

I had used 64 bit OSC editor for windows.

Ver 1.8.4 win64.zip
Is that ok or not ?

73s,
Prem
by Prem
Sun Nov 26, 2017 3:32 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi,

Can anyone tell me the idea to set Channel for different controls in Touch OSC Layout like Button, Slider etc. ?
Is the Channel number same for all controls in a Page or in a Layout ?

73s
Prem
by Prem
Sun Nov 26, 2017 3:29 pm
Forum: PowerSDR mRX
Topic: PowerSDR mRX PS 3.4.6 Released
Replies: 33
Views: 26355

Re: PowerSDR mRX PS 3.4.6 Released

Hi Scott,

It was some configuration error locally in my machine !
Now I find it is ok. No error.

73s
Prem
by Prem
Sat Nov 25, 2017 5:40 pm
Forum: PowerSDR mRX
Topic: PowerSDR mRX PS 3.4.6 Released
Replies: 33
Views: 26355

Re: PowerSDR mRX PS 3.4.6 Released

Hi Scott,

I have installed 3.4.6 and notice that when VOX enable, MOX get enables.
Please have a look and advice it is due to some trouble in my system ?

73s,

Prem
by Prem
Sat Nov 25, 2017 6:39 am
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Dear Scott,

Well , noted. Thank you very much.

I checked the open option in touch OSC Editor to see samples available there. But all folders are empty and so I could not find any sample Layouts there to give a try. I only have yours and that one did not use a rotary Vol control.

73s,

Prem
by Prem
Thu Nov 23, 2017 5:32 am
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott, I could make it working with new Database. I removed all files from PSDR mRx folder and then imported my old database. But I loose some newly created TX Profiles. Can I get it back ? Hi Team, Can anyone help me to configure and use rotary type slider to use as Vol control, Mic Gain etc . ?...
by Prem
Wed Nov 22, 2017 12:54 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott,


PSDR fail to run now. Means program fail to open.
I tried after reinstalling PSDRmRx 3.4.3. Still same error.

Need to delete old database ? I dont know where it is lying. Can you help me to correct it please ?

Thanks and Regards,

Prem.
by Prem
Wed Nov 22, 2017 12:19 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott, I was trying to prepare one custom Layout for me starting from your layout. I have some doubts as : 1. Any special setting need when I place a button and a label over it ? 2. Settings for Rotary controller ?? 3. Specialty of Multi push ?? 4. Difference between individual Buttons and Multi ...
by Prem
Mon Nov 20, 2017 6:18 am
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott, I could make it working. Thanks for advice. For the rest of team who are new to this , I am posting here the settings I made it to work. 1. Download and install Touch OSC Bridge and Run it. 2. Download and install and Run Touch OSC Editor. Build our Panel as required to control PSDR from T...
by Prem
Sun Nov 19, 2017 5:57 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott,

It is installed on my PC. But still not communicate.
When I run OSC Bridge, cant see any running programme !!
i think OSC Bridge do not run . I cant see any program as OSC Bridge running .

Any further sugession ?

73s

Prem
by Prem
Sun Nov 19, 2017 5:19 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi Scott, I installed touch OSC in my iPad (Paid version) . Installed Editor in my PC (free version) . Made a simple layout with a push button. Then downloaded layout to iPad. My PSDR identify touch OSC. But I am not able to communicate from iPad to PSDR. Do we need to buy editor paid version ? Any ...
by Prem
Sun Nov 19, 2017 3:22 pm
Forum: Macro & MIDI Controller Software, Hardware & Scripts
Topic: TouchOSC custom tablet MIDI control surface
Replies: 47
Views: 46351

Re: TouchOSC custom tablet MIDI control surface

Hi,

I purchased TOUCH OSC for my Ipad and need to use it for my Hermes. Is there any detailed tutorial to INSTALL and configure step by step ?

73s,

Prem

Go to advanced search