Search found 23 matches

by iw3fvz
Thu Feb 13, 2020 12:36 pm
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 144664

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

Hi Fabio, I have tried to reproduce this on my 7000DLE running Orion_MkII_Protocol_2_v2.0b.rbf and cannot. I put a switch on PTT-IN (as per your attached photo) and when I switch it on PTT works on all modes including CW. BUT, if the CW QSK is enabled it does not. Could that be the case for you? -R...
by iw3fvz
Thu Feb 13, 2020 12:14 pm
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 144664

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

Hi Fabio, I have tried to reproduce this on my 7000DLE running Orion_MkII_Protocol_2_v2.0b.rbf and cannot. I put a switch on PTT-IN (as per your attached photo) and when I switch it on PTT works on all modes including CW. BUT, if the CW QSK is enabled it does not. Could that be the case for you? -R...
by iw3fvz
Wed Feb 12, 2020 8:00 am
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 144664

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

w-u-2-o wrote:Fabio,

Is this only a problem with 2.0b?


No all 2.0* firmware.

perhaps also in 1.9
by iw3fvz
Tue Feb 11, 2020 5:30 pm
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 144664

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

This is why they have a "KEY" jack on the front. Read the manual.............. KEY jack is connect to PC and simulate a key the PTT on mic is fisical connect to back pannel I read the manual ...the PTT iworks in all mode except cw Do you not hear a relay engage ? No ..i hear the "cw ...
by iw3fvz
Tue Feb 11, 2020 1:52 pm
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 144664

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

hello,
i connect externa ptt on back ptt in jack.

I enabled PTT ON ìn setup

PTT is ok on lsb, usb, fm, am, digu, digl but no in CW

PTT seems disabled

it's correct or is a bug???

FW 2.0b - Thetis 2.6.9 - anan 7000
by iw3fvz
Mon Feb 10, 2020 1:27 pm
Forum: Thetis
Topic: 2.6.9
Replies: 597
Views: 357717

Re: 2.6.9

hello,
18 hours in CQ WPX RTTY with 0 crash, 0 seq error, 0 problem.

Anan 7000DLE, FW v2.0a, Thetis 2.6.9

Windows 10, dedicated network subnet, Ryzen 7 3700K, 16GB

very stable..

thank to all developers
by iw3fvz
Mon Jan 27, 2020 6:20 pm
Forum: Thetis
Topic: 2.6.9
Replies: 597
Views: 357717

Re: 2.6.9

Hello, is there a reason why PTT-IN does not work in CW while there are no problems in SSB? I have enabled PTT in the panel but it does not go into CW transmission... ....wrong? I use the QARTest Contest software and i want to send with HW-PTT (RTS real serial port) and not with "PTT via CAT&qu...
by iw3fvz
Wed Jan 08, 2020 9:11 am
Forum: Thetis
Topic: 2.6.9
Replies: 597
Views: 357717

Re: 2.6.9

Serial port CW keying connections are not working properly on 2.6.9 b6 (and using an 8000DLE with pre8). 1. The serial port CW PTT line function does not operate under any combination of CW modes and controls. Thetis does not go into a TX mode (and not emit RF) when the serial port CW PTT line is a...
by iw3fvz
Mon Jan 06, 2020 2:03 pm
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 144664

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

I am running a dedicated Intel Gigabit CT card for my 8000DLE with Thetis b6 and P2 2.0 pre8. I have had two lock-ups in over a week of operation and was going to try the two settings changes to the Intel card. I changed the RX buffer but do not see the IRQ Mitigation setting listed in Advanced tab...
by iw3fvz
Mon Jan 06, 2020 8:55 am
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 144664

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

Hello, one hour contest in RTTY Round whithout SEQ problem. Thetis 2.6.9b6 . fw 2.0pre8 Dedicated Intel nic interface with this changes: - Disable IRQ mitigation (Default enabled) - 384 byte of RX buffer (default 256) i use this document: https://downloadcenter.intel.com/download/28410/Adapter-User-...
by iw3fvz
Mon Jan 06, 2020 8:42 am
Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
Topic: 7000DLE Mk-II PTT IN issue?
Replies: 8
Views: 11751

Re: 7000DLE Mk-II PTT IN issue?

Hello, i use ANAN 7000 with firmware 2.0p8 and Thetis 2.6.9b6. In CW i need to switch PTT via external ptt from dig interface but this doesn't work (semi break-in disabled) I listen the cw note in the monitor but no RF signal comes out. Idem with virtual port on DSP-CW configuratiorn RTS doesn't wor...
by iw3fvz
Sun Jan 05, 2020 11:01 am
Forum: Orion Mk II & III Firmware (all 7000, 8000 & Andromeda Variants)
Topic: 7000DLE Mk-II PTT IN issue?
Replies: 8
Views: 11751

Re: 7000DLE Mk-II PTT IN issue?

Same problem

Anan 7000 - fw 2.0pre8 - 2.6.9-b6

73

IW3FVZ
by iw3fvz
Thu Dec 26, 2019 2:58 pm
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 144664

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

For SEQ problem i suggest to disable "Interrupt mitigation" (if present) in your NIC
by iw3fvz
Thu Dec 26, 2019 8:41 am
Forum: Protocol 2 Firmware (all radios)
Topic: OLD 7000/8000 Orion MKII Protocol 2 Firmware Topic
Replies: 185
Views: 144664

Re: New 7000/8000 Orion MKII Protocol 2 Firmware Topic

Tested pre7 with Thetis 2.6.9 B6

Perfect ... the minimal seq error in tx are vanishid
(from pre4)
by iw3fvz
Tue Nov 05, 2019 11:15 am
Forum: Thetis
Topic: 2.6.9
Replies: 597
Views: 357717

Re: 2.6.9

Hello,
for update to 2.6.8 or 2.6.9 i need 2.0 firmware????

link for 2.0 firmware??

Thanks
by iw3fvz
Mon Jan 08, 2018 4:04 pm
Forum: Apache Labs News
Topic: ANAN-7000DLE Update
Replies: 37
Views: 58519

Re: ANAN-7000DLE Update

Hello, i have 2 questions: (Anan 7000) 1) it's normal if I use the external ptt in CW mode the radio does not switch in transmission? (openHPSDR switch in tx but the anan 7000 no...not hear relay switch) with o without the "semi-bk" 2) again in CW, I noticed that sometimes if I switch in T...
by iw3fvz
Tue Dec 05, 2017 2:06 pm
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Anan 7000 External Fan Connector
Replies: 11
Views: 7628

Re: Anan 7000 External Fan Connector

administrator wrote:Hi Fabio,

The details of the connector (Digikey part nos)

A30590-ND (Connector)
A30642-ND (Metal connecting terminals)

You can use a fan up to 250mA 12v rating,

Thanks,

Abhi


Thanks Abhi
by iw3fvz
Mon Dec 04, 2017 11:08 am
Forum: Everything Else: Antennas, Relays, Switches, Power, Grounding, Cooling, etc.
Topic: Anan 7000 External Fan Connector
Replies: 11
Views: 7628

Anan 7000 External Fan Connector

Hello,
how many current is available in the fan external connector?????

it's correct this connector?

http://it.farnell.com/molex/39-01-2020/ ... /dp/151866

thanks.
Fabio IW3FVZ
by iw3fvz
Mon Nov 20, 2017 9:30 pm
Forum: Apache Labs News
Topic: ANAN-7000DLE Update
Replies: 37
Views: 58519

Re: ANAN-7000DLE Update

Bryan W4WMT wrote:Got my invoice this morning from Apache Labs, stating shipping in 3-4 days :-)s


Good new :)
by iw3fvz
Mon Nov 20, 2017 2:35 pm
Forum: Apache Labs News
Topic: ANAN-7000DLE Update
Replies: 37
Views: 58519

Re: ANAN-7000DLE Update

ANAN-7000DLE Update: We are happy to inform everyone waiting for the 7000DLEs that the factory has completed production of the first lot of PCBs, now we will commence integration of the electronics into the chassis and subsequent testing and burn-in of the radios, expected ship date is mid November...
by iw3fvz
Wed Aug 02, 2017 5:18 pm
Forum: Apache Labs News
Topic: Apache Labs Announces the ANAN-7000DLE
Replies: 15
Views: 23264

Re: Apache Labs Announces the ANAN-7000DLE

Hello,
the 7000 has the "pre-distortion" connectors like 8000???

Thanks
Fabio IW3FVZ
by iw3fvz
Wed Jul 19, 2017 10:05 am
Forum: PowerSDR mRX
Topic: Info panadapter
Replies: 2
Views: 5329

Re: Info panadapter

Very beautiful, many thanks Scott .
by iw3fvz
Tue Jul 18, 2017 1:55 pm
Forum: PowerSDR mRX
Topic: Info panadapter
Replies: 2
Views: 5329

Info panadapter

Hello,
someone know the values to make the panadapter more fluid and fast (like smartSDR example).

thanks
Fabio IW3FVZ

Go to advanced search