Orion MKII 160-6M 2W SDR Transceiver Board

$1695.00
  • Description
  • Technical Specifications

Orion MKII (assembled & Tested) card

90 Days Limited Hardware Warranty Against Manufacturing Defects.

IN STOCK.

General Specifications:

  • Architecture: Direct Sampling DDC/DUC Transceiver with T/R switched output.
  • Interface: Ethernet
  • Phase Noise (Clock): -149dB @ 10Khz
  • TCXO Stability (Typical): /- .1 PPM
  • Modes: CW, SSB, NFM, AM, Digital
  • Frequency Resolution: 1 Hz

 

Electrical Specifications:

  • 13.8v DC @ 3A

 

Mechanical Specifications:

  • Dimensions: 160mm x 160mm (Not including extrusions)

 

Receiver Specifications:

  • Receiver Architecture: Direct Down Conversion
  • Dual 16 bit Phase Synchronous ADCs
  • Frequency Coverage: 9Khz to 60Mhz
  • Attenuator: 1-30dB step attenuator
  • Reciprocal Mixing Dynamic Range (RMDR): 116dB @ 2Khz
  • Receiver Phase noise: -149dB @ 10Khz
  • Image rejection: 100dB
  • Hardware support for 7 independent receivers assignable to either ADC 

 

Transmitter Specifications:

  • Transmitter Architecture: Direct Up Conversion
  • DAC Resolution: 16 bit
  • RF Output Power: 2W
  • IMD: IMD3 typically -80dB with PureSignal enabled
  • Harmonics: Typically better than -40dBc without LPFs
  • Carrier and Opposite Sideband Suppression: Better than -80dBc

 

IOs:

  • 26 Pin Accessory port
  • DB9 Seven Software configurable Open Collector Outputs
  • 10Mhz Reference Input
  • Barrel Mic, CW Key, Headphones and Speaker Outputs
  • RJ45 Ethernet LAN Connector

 

General Specifications:

  • Architecture: Direct Sampling DDC/DUC Transceiver
  • Interface: Ethernet
  • Phase Noise (Clock): -149dB @ 10Khz
  • TCXO Stability (Typical): /- .1 PPM
  • Modes: CW, SSB, NFM, AM, Digital
  • Frequency Resolution: 1 Hz

 

Electrical Specifications:

  • 13.8v DC @ 3A

 

Mechanical Specifications:

  • Dimensions: 160mm x 160mm (Not including extrusions)

 

Receiver Specifications:

  • Receiver Architecture: Direct Down Conversion
  • Dual 16 bit Phase Synchronous ADCs
  • Frequency Coverage: 9Khz to 60Mhz
  • Attenuator: 1-30dB step attenuator
  • Reciprocal Mixing Dynamic Range (RMDR): 116dB @ 2Khz
  • Receiver Phase noise: -149dB @ 10Khz
  • Image rejection: 100dB
  • Hardware support for 7 independent receivers assignable to either ADC 

 

Transmitter Specifications:

  • Transmitter Architecture: Direct Up Conversion
  • DAC Resolution: 16 bit
  • RF Output Power: 2W
  • IMD: IMD3 typically -80dB with PureSignal enabled
  • Harmonics: Typically better than -40dBc without LPFs
  • Carrier and Opposite Sideband Suppression: Better than -80dBc

 

IOs:

  • 26 Pin Accessory port
  • DB9 Seven Software configurable Open Collector Outputs
  • 10Mhz Reference Input
  • Barrel Mic, CW Key, Headphones and Speaker Outputs
  • RJ45 Ethernet LAN Connector

 

Downloads

Subscribe Newsletter
To get the latest scoop right to your inbox.

Help Centre