• 91-124-4245173/4/5

    (10AM - 6PM IST - INDIA)

    ANAN-100 HF + 6M 100W ALL MODE SDR TRANSCEIVER

    $2489.00
    • Description
    • Technical Specifications

    Lead time 2 weeks

    * 2 years warranty against manufacturing defects

    * Assembled & Tested

    * The Customer is responsibe for any Duties, Taxes or levies charged by customs during import.

    Please note that we do not ship to the UK, France, Italy, Sweden, Norway and Spain directly, kindly contact our respective distributors if you would like to purchase an ANAN radio or if you have any queries.

    https://apache-labs.com/contact-us.html

     

    Declarations of Conformity

    The ANAN-100 complies with FCC Part 97 rules for the Amateur Radio Service.

    • Rugged Extruded Aluminum Housing, Weight: 4.5Kgs approx, Dimensions: 265.5mm (W) x 220mm (D) x 80mm (H)
       
    • RD100HHF1 Mosfet 100W Linear amplifier (160M-6M)
    • Combination of 7 LPF and 5 HPF Banks for front end Filtering (User Configurable as well)
    • 6M  LNA
    • Software Configurable Triple antenna ports
       
    • SWR Bridge, enables Forward and Reverse Power plus SWR to be displayed using suitable PC software.
       
    • T/R, LPF Switching using mechanical relays (gold plated contacts)
       
    • Reverse Polarity protection with resettable fuse
       
    • All cables, Hardware and instructions to make a complete transceiver with Hermes
    • Continuous, uninterrupted, receive coverage from 10KHz to 55MHz. .
       
    • Supports Real-Time display of entire sectrum from 0-55mHz (with suitable PC software)
       
    • Supports 2 fully independent receivers (sharing the same antenna - and with suitable PC software)
       
    • Each receiver can display 48/96/192/384/1152kHz of spectrum
       
    • Blocking Dynamic Range (ARRL Method) no detectable gain compression
      below ADC overload
       
    • Transmit and receiver image rejection > 100dB
       
    • Transmitter two-tone 3rd order IMD of -31dBc on 20m @ 100W PEP output
       
    • 100W RF output on 160 – 6m amateur bands
       
    • Built-in high performance preamp, with a noise floor typically -135dBm in 500Hz
       
    • Software-selectable 31dB input attenuator in 1dB steps
       
    • High performance receiver – same specifications as the HPSDR Mercury receiver (ie Dynamic Range typically 125dB)
       
    • FPGA code can be updated via the Industry Standard TCP/IP network Ethernet connection
       
    • Seven user-configurable open-collector outputs, independently selectable per band and Tx/Rx (for relay control, etc - with sequencing via PC code)
       
    • Separate open-collector PTT connection for amplifier control, etc, with sequencer
       
    • Microphone PTT jumper-selectable from tip or ring connection
       
    • Bias for electret microphones via jumper
       
    • Four user-configurable 12 bit analogue inputs (for ALC, SWR etc)
       
    • Three user-configurable digital inputs (for linear amplifier over temperature, etc)
       
    • I2C bus connector for control of external equipment
       
    • Full QSK operation (performance dependant on associated PC and control software)
       
    • Low-level transmitter output for transverter use via user-selectable output attenuator
       
    • Stereo audio outputs at line and headphone levels
       
    • In-built 1W stereo audio amplifier for directly driving speakers
       
    • Direct, de-bounced connections for a Morse key (straight or iambic) and PTT
       
    • Low phase noise (-137dBc/Hz @ 1kHz) 122.88MHz master clock, which can be phase-locked to an internal 10MHz TCXO or external fequency reference
       
    • Low phase noise (-140dBc/Hz @ 1kHz at 14MHz) 122.88MHz master clock,
      which can be phase-locked to an internal 10MHz TCXO or external frequency
      reference
       
    • Industry Standard TCP/IP network Ethernet interface supports static, APIPA or DHCP IP address
       
    • Hermes responds to ping and ARP requests and auto senses network connection speed
       
    • Eight (8) Layer PCB design for the most professional, state-of-the-art, design available.
    Page generated in 0.0238 seconds.